sensor led strip light for bedroom lighting
sensor led strip light for bedroom lighting

1.5M Motion Activated LED Timer Sensor Strips for Single Bed Lighting

  • Timer Function + Energy Saving — Smart Sensor Strip as a Night Light,with Timer function from 15 sec to 150 sec, Auto Turn ON when you near it in the dark environment,and Shut-OFF when you walking away, further energy saving.
  • No Glaring — Suitable & enough brightness to light up your room at night,never make your eyes uncomfortable
  • Quality Guarantee — Adopting UL listed power adapter to prolong its life-span
  • Perfect Convenient Installation — Using strong foam adhesive tape,better than normal 3M tape,never easy to fall off for a long time, Meanwhile,it is with 4pcs Cable wire holders for better installation insead of screws,not damage your furniture.
  • Multiply purpose — Light when you need it,multiply purpose,normally under bed lighting,also widely for kitchen, stair exit, bedroom, washroom, closet etc.

1.5M Motion Activated Single Bed Night Lights,Warm White LED Timer Sensor Strip Light for Kids Bedroom Closet Cabinet Kitchen Stair Exit Lighting (Single Sensor Kit for Single Bed)


Timer Sensor LED Strip Light
With the timer motion sensor,detecting both light and movement,lighting up the dark environmental when you walk into induction area, Such as: get up to washroom,go up & down stairs,or come nearby at night. Lighting up your way and never disturbing others.

LED Flexible Strip Light
LED Qty: 90 leds (1.5m / 5ft)
LED Strip Light Lengh=1.5M, Width=8mm
Color: Warm White
Color Temperature: 2800-3200K
Working Voltage:12V DC
Waterproof Grade: IP65

UL Listed Power Adapter: 12V 1A

Motion Sensor:
Working Voltage:12V
15sec – 150 sec timer function (Auto turn on shut-off in the dark environment,light up when you need it,also energy saving)
Detecting angle is 120°

Note:As the LED sensor strip lights is a light sensation,so the light will light on based on a dark environment, and will not work when it can sense light.

Installation Reminding
1. Please kindly clean the dust,ensure the paste place is enough clean before sticking, avoid easy falling off.
2.Remove the adhesive tape film back of led strips,then install,there was 4pcs*wire holders in the package for fix the extension cable wire. By the way,you can cut the led strip lights on the marked place depends on your requested length.
3. You must notice the direction of the (PIR) motion sensor,forward to the direction of walking,you can see the above photos,which tell you how to install.

What You Get:
1 x 1.5m LED Sensor Bed Light Strip
1 x Motion and Light Sensor
1 x UL Listed Power Adapter (US Plug)
1 x 1m Femal to Male Extension Cable
4 x Wire Holders

Your Name

Your Email

Inquiry Product

Your Message